Zebra Printer Setup Utility

With Zebra’s Printer Setup Utility, configuring your Link-OS printers to optimize performance is easy – no specialized knowledge required.

To use, tap the printer you wish to configure. Your printer and device will instantly begin communicating via Bluetooth. Then follow the simple setup wizards that walk you through how to set specific printing parameters – such as calibration, media type, ribbon, printer language and print quality – to optimize performance. If your Android device does not support Tap and Pair via NFC, the app can discover your printer via Bluetooth and network, or connect to it via USB.

With the Security Assessment Wizard feature, assess your Zebra printer security posture, compare your settings against security best practices and make changes based on your conditions to increase protection.

Bluetooth Printers are now manageable, even in the field!

Normally, Bluetooth printers are not easily managed – particularly when they are used in the field by a mobile workforce. Zebra’s Printer Setup Utility makes Bluetooth printers manageable via the Cloud by allowing the app to retrieve files from your CLoud storage provider and then transfer these files to the printers for configuration and printer OS updates. This simplifies the management of Link-OS Bluetooth printers, dramatically improving both printer ROI and the productivity of a mobile workforce.

Help is just a tap away - use the "Zebra Assist" feature to send your printer's configuration directly to Zebra's support team.

The following Zebra Link-OS printers series are supported: ZD400, ZD500, ZD600, ZQ300, ZQ500, ZQ600, ZT200, ZT400, ZT500, ZT600, iMZ and QLn, ZR338, ZR600.

The app supports Bluetooth Classic, network and USB On-The-Go connectivity.

Note: Tap/Pair and USB On-The-Go can only be used on those Android devices that support NFC (for Tap/Pair) and USB OTG.

使用Zebra的打印机设置实用程序，可以轻松配置Link-OS打印机以优化性能，而无需专业知识。

要使用，请点击您要配置的打印机。您的打印机和设备将立即开始通过蓝牙进行通信。然后遵循简单的设置向导，引导您逐步设置特定的打印参数，例如校准，介质类型，色带，打印机语言和打印质量，以优化性能。如果您的Android设备不支持通过NFC进行分接和配对，则该应用可以通过蓝牙和网络发现您的打印机，或通过USB连接到打印机。

使用“安全评估向导”功能，评估Zebra打印机的安全状况，将设置与安全最佳做法进行比较，并根据情况进行更改以增强保护。

蓝牙打印机现在即使在现场也可以管理！

通常，蓝牙打印机不容易管理-尤其是在移动工作人员在野外使用时。 Zebra的打印机设置实用程序允许应用程序从您的CLoud存储提供商检索文件，然后将这些文件传输到打印机以进行配置和打印机OS更新，从而使蓝牙打印机可以通过云进行管理。这简化了Link-OS蓝牙打印机的管理，大大提高了打印机的投资回报率和移​​动工作人员的生产率。

只需轻按一下即可获得帮助-使用“ Zebra Assist”功能将打印机的配置直接发送给Zebra的支持团队。

支持以下Zebra Link-OS打印机系列：ZD400，ZD500，ZD600，ZQ300，ZQ500，ZQ600，ZT200，ZT400，ZT500，ZT600，iMZ和QLn，ZR338，ZR600。

该应用程序支持Bluetooth Classic，网络和USB On-The-Go连接。

注意：Tap / Pair和USB On-The-Go只能在支持NFC（用于Tap / Pair）和USB OTG的Android设备上使用。